Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 196 / 1192

CLI ReferenceInterface Configuration Commands MAC Address Configuration Commands
00do.f822.33aa and forward the corresponding packets:
Ruijie# configure t
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# address-bind 00d0.f822.33aa ip 192.168.5.2
Ruijie(config)# address-bind ipv6-mode compatible
Related
commands
Command Function
show address-bind
uplink
Show the exceptional port of
the address binding.
Platform
description
address-bind uplink
Use this command to configure IP address-MAC address binding.
address-bind uplink intf-id
no address-bind uplink intf-id
Parameter
description
Parameter Description
intf-id
Exceptional port
Command
mode
Global configuration mode.
Usage
guidelines
If you have bound an IP address and a MAC address, the switch will
discard the packets that have the same source IP address but
different source MAC address.
If the port is an exceptional port and is installed (see address-bind
install), this binding policy does not take effect.
Examples
Following example is to set the fa 0/1 port as an exceptional port for
address binding.
Ruijie(config)# address-bind uplink fa0/1
Related
commands
Command Function
show address-bind uplink
Show the exceptional port of
address binding.
Platform
description
The version must be RGOS10.1 and later.