Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 182 / 1192

CLI ReferenceInterface Configuration Commands Interface Configuration Commands
Ruijie(config-if)# switchport trunk allowed vlan remove 2
Ruijie(config-if)# end
Ruijie# show interfaces fastethernet 1/15 switchport
Switchport is enabled
Mode is trunk port
Access vlan is 1,Native vlan is 1
Protected is disabled
Vlan lists is
1,3-4094
Related
Commands
Command Description
show interfaces
Show the interface information.
switchport access
Use this command to configure an interface as a static
access port and assign it to a VLAN.
Platform
Description
show interfaces
Use this command to show the interface information, statistical information and
optical module information.
show interfaces [ interface-id ] [ counters [ module module-id | nonzero | vlan
vlan-id ] | description | mtu | status [ module module-id | vlan vlan-id ] |
switchport | trunk | transceiver [ alarm | diagnosis ] | usage ]
Parameter
Description
Parameter Description
interface-id
Interface (including Ethernet interface, aggregate port, SVI
interface, loopback interface and VSL interface).
counters The statistics on the interface.
counters
module
module-id
Display the packet statistics of all ports on the specified
modules.
counters
nonzero
Display the interface (including Ethernet interface, aggregate
port and VSL interface) statistics information (0 excluded).
counters vlan
vlan-id
Display the packet statistics of all member ports in the
specified vlans.
description Describes the interface, including its link status.
mtu
Display the MTU statistics of the ports (including Ethernet
interfaces and aggregate ports)
status
Display the status of all the link of the Layer 2 interface,
including the rate and duplex.
status module Display the status statistics of all member ports on the