Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 180 / 1192

CLI ReferenceInterface Configuration Commands Interface Configuration Commands
switchport mode
Use this command to assign a L2 interface (switch port) mode. You can designate
this interface as an access port or a trunk port or an 802.1Q tunnel. Add no in the
command to restore it to the default.
switchport mode {access | trunk}
no switchport mode
Parameter
Description
Parameter Description
access Configure the switch port as an access port.
trunk Configure the switch port as a trunk port.
Defaults By default, the switch port is an access port.
Command Mode Interface configuration mode.
Usage Guide
If a switch port is an access port, it can be a member port of only one
VLAN. Use switchport access vlan to specify the member of the
VLAN.
A trunk port can be a member port of various VLANs on the allowed-VLAN list. The
allowed VLAN list of the interface determines the VLANs of the interface. The trunk
port is the member of all the VLANs on the allowed VLAN list. Use switchport
trunk to define the allowed-VLANs list.
Configuration
Examples
Ruijie(config-if)# switchport mode trunk
Related
Commands
Command Description
switchport access
Use this command to configure an interface as a static
access port and assign it to a VLAN.
switchport trunk
Use this command to specify a native VLAN and the
allowed-VLAN list for the trunk port.
Platform
Description