Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1163 / 1192

CLI Reference Guide SNMP Configuration Commands
security parameters.
encrypted
Input the password in cipher text mode.
In cipher text mode, input continuous HEX alphanumeric
characters. Note that the authentication password of MD5 has
a length of 16 characters, while that of SHA has a length of 20
bytes. Two characters make a byte. The encrypted key can
only be used by the local SNMP engine on the switch.
auth
Specify whether to use the authentication.
auth-password
Password string (no more than 32 characters) used by the
authentication protocol. The system will change the password
to the corresponding authentication key.
priv
Encryption mode. des56 refers to 56-bit DES encryption
protocol.
priv-password: password string (no more than 32 characters)
used for encryption. The system will change the password to
the corresponding encryption key.
md5
Enable the MD5 authentication protocol. While the sha enables
the SHA authentication protocol.
aclnumber
Sequence number of the ACL in the range of 1 to 99, which
specifies the IPV4 address range of the NMS that are permitted
to access the MIB.
aclname
Name of the ACL, which specifies the IPV4 address range of
the NMS that are permitted to access the MIB.
ipv6_aclname
Name of the IPv6 ACL, which specifies the IPv6 address range
of the NMS that are permitted to access the MIB
Defaults N/A.
Command
Mode
Global configuration mode.
Usage Guide -
Configuration
Examples
The example below configures an SNMPv3 user with MD5 authentication and DES encryption:
Ruijie(config)# snmp-server user user-2 mib2user v3 auth md5 authpassstr priv
des56 despassstr
Related
Commands
Command Description
show snmp user
Show the SNMP user configuration.
Platform
Description
-