Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1162 / 1192

CLI Reference Guide SNMP Configuration Commands
snmp-server udp-port
Use this command to specify the number of the protocol port to receive SNMP packets in global
configuration mode. Use the no form of this command to remove the configuration and use the default
protocol port 161 to receive SNMP packets.
snmp-server udp-port port-num
no snmp-server udp-port
Parameter
Description
Parameter Description
port-num Specify the number of the protocol port to receive SNMP packets.
Defaults By default, the protocol port 161 is used to receive SNMP packets.
Command
Mode
Global configuration mode
Usage Guide -
Configuration
Examples
The following example specifies the protocol port 15000 to receive SNMP packets:
Ruijie(config)# snmp-server udp-port 15000
Related
Commands
Command Description
- -
Platform
Description
-
snmp-server user
Use this command to set the
SNMP
name in global configuration mode . The no form of this command
is used to delete the user.
snmp-server user username groupname { v1 | v2c | v3 [ encrypted ] [ auth { md5 | sha }
auth-password ] [ priv des56 priv-password ] } [ access { [ ipv6 ipv6_aclname ] [ aclnum | aclname } ] ]
no snmp-server user username groupname { v1 | v2c | v3 }
Parameter
Description
Parameter Description
username User name
groupname Group name of the user.
v1 | v2c | v3
SNMP version. But only SNMPv3 supports the following