Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1154 / 1192

CLI Reference Guide SNMP Configuration Commands
snmp-server group
Use this command to set the
SNMP
user group in global configuration mode . The no form of this
command is used to remove the user group.
snmp-server group groupname { v1 | v2c | v3 { auth | noauth | priv } } [ read readview ] [ write
writeview ] [ access { [ ipv6 ipv6_aclname ] [ aclnum | aclname } ]
no snmp-server group groupname { v1 | v2c | v3 { auth | noauth | priv } }
Parameter
Description
Parameter Description
v1 | v2c | v3 SNMP version
auth
Authenticate the messages transmitted by the user group without
encryption. This applies to only SNMPv3.
noauth
Neither authenticate nor encrypt the messages transmitted by
the user group. This applies to only SNMPv3.
priv
Authenticate and encrypt the messages transmitted by the user
group. This applies to only SNMPv3.
readview Associate with a read-only view.
aclnum
Sequence number of the ACL in the range of 1 to 99, which
specifies the IPV4 address range of the NMS that are permitted
to access the MIB.
aclname
Name of the ACL, which specifies the IPV4 address range of the
NMS that are permitted to access the MIB.
ipv6_aclname
Name of the IPv6 ACL, which specifies the IPv6 address range of
the NMS that are permitted to access the MIB.
writeview Associate with a read-write view.
Defaults
N/A.
Command
Mode
Global configuration mode.
Usage Guide
-
Configuration
Examples
The example below sets a user group.
Ruijie(config)# snmp-server group mib2user v3 priv read mib2
Related
Commands
Command Description
show snmp group Show the SNMP user group configuration.
Platform
Description
-