Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1151 / 1192

CLI Reference Guide SNMP Configuration Commands
no snmp-server chassis-id
Parameter
Description
Parameter Description
text Text of the system sequential number, numerals or characters.
Defaults The default sequence number is 60FF60.
Command
Mode
Global configuration mode.
Usage Guide
The SNMP system sequence number is generally the sequence number of the machine to facilitate
the device identification. The sequence number can be viewed through the show snmp command.
Configuration
Examples
The example below specifies the SNMP system sequence number as 123456:
Ruijie(config)# snmp-server chassis-id 123456
Related
Commands
Command Description
show snmp Show the SNMP information.
Platform
Description
-
snmp-server community
Use this command to specify the SNMP community access string in global configuration mode. The no
format of the command cancels the SNMP community access string.
snmp-server community [ 0 | 7 ] string [ view view-name ] [ [ ro | rw ] [ host ipaddr ] [ ipv6
ipv6-aclname ] [ aclnum ] [ aclname ]
no snmp-server community [ 0 | 7 ] string
Parameter
Description
Parameter Description
0 It indicates that the entered community string is in plaintext.
7
It indicates that the entered community string is in ciphertext.
string
Community string, which is equivalent to the communication
password between the NMS and the SNMP agent
view-name Name of the view used for management
ro Indicate that the NMS can only read the variables of the MIB.
rw
Indicate that the NMS can read and write the variables of the
MIB.
aclnum
Sequence number of the ACL, which specifies the IPV4
address range of the NMS that are permitted to access the
MIB.