Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1142 / 1192

CLI Reference VSU Configuration Commands
switch convert mode
Perform a handover between the standalone and VSU modes.
switch convert mode { virtual | standalone [ sw_id ] }
Parameter
Description
Parameter Description
virtual Shift into the VSU mode.
standalone
Shift into the standalone mode.
sw_id Indicates the switch ID
Default
Configuration
The switch operates in the standalone mode by default.
Command
Mode
Privileged EXEC mode
Usage
Guidelines

After the switch convert mode virtual command is run, the software automatically backs up
the configuration file in the standalone mode as standalone.text , removes the configuration file
config.text , prompts the user to decide whether to overwrite config.text with
virtual_switch.text , write related configurations of VSU in config_vsu_dat , and finally restarts
the switch.

After the switch convert mode standalone command is run, the master device backs up the
configuration file in the VSU mode as virtual_switch.text , removes the configuration file
config.text , prompts the user to decide whether to overwrite config.text with standalone.text ,
writes related configurations of VSU in config_vsu_dat , and finally restarts the switch.

This command can be executed in both the standalone and VSU modes. If the command is run
in the standalone mode, the current device performs the standalone/VSU mode handover. If the
command contains a switch ID and is run in the VSU mode, the switch with the ID performs the
standalone/VSU mode handover. If the command does not contain a switch ID, the master
device performs a handover. It is advised to perform standalone/VSU mode handover on the
slave device and then on the master device.
Configuration
Examples
#In the standalone mode, configure the domain ID to 1 , the switch ID to 1 and the switch priority to
200 and then convert the switch from standalone mode to VSU mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# switch 1
Ruijie(config-vs-domain)# switch 1 priority 200
Ruijie(config-vs-domain)# end
Ruijie# switch convert mode virtual
#In the VSU mode, convert the slave device (The sw_id is 2) to the standalone mode and then
convert the master device (The sw_id is 1) to the standalone mode.
Ruijie# switch convert mode standlone 2
Ruijie# switch convert mode standlone 1