Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1078 / 1192

CLI Reference SEM Configuration Commands
poll-interval
poll-int-value
The comparing interval. By default, it is 5s.
exit-op operator
The method to recover comparison (optional):
eq : equal to
ge : greater than or equal to
gt : greater than
le : less than or equal to
lt : less than
ne : unequal to
exit-val exit-value
The value to recover comparison (optional)
slot { slot-num |
slave }
The detected slot, the salve means the slave
management board.
subsystem
subsystem-id
The detected subsystem, which is used for the
multiple CPU board (optional).
Default
configuration
No event is configured.
Command
mode
SEM configuration mode
Usage
Guideline
The event system command is used to monitor the following items:
CPU utilization by the system: type cpu scope system
CPU utilization by a certain task: type cpu scope task task-name
Memory utilization by the system: type memory scope system-use
percent
Absolute memory utilization by the system: type memory scope
system-use absolute
Free memory of the system: type memory scope system-free
percent
Absolute free memory of the system: type memory scope
system-free absolute
Memory utilization by a certain task: type memory scope task
task-name percent
Absolute memory utilization by a certain task: type memory scope task
task-name absolute
Available events:
Variable Name Function
_mon_type Indicates the detection type
_value Indicates the monitored value