Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 107 / 1192

CLI Reference Guide Syslog Configuration Commands
follows:
timestamp facility-severity-mnemonic: description
timestamp module name-severity level-information about mnemonic: detailed log information
For example: May 31 23:31:28 SYS-5-CONFIG_I: Configured from console by console
The differences between the private and the default log format lie in timestamp and identification
s
tring. In the private log format, there is no “*” before the timestamp and no “:” after it and no “%”
before the identification string.
Configuration
Examples
The following example adjusts the log format to the private one:
Ruijie(config)# service private-syslog
Related
Commands
Command Description
logging on Turn on the log switch.
service timestamps Enable the timestamp in log information.
Platform
Description
-
service sequence-numbers
Use this command to attach sequential numbers into the logs. The no form of the command removes
the sequential numbers in the logs.
service sequence-numbers
no service sequence-numbers
Parameter
Description
Parameter Description
- -
Defaults No sequential numbers are attached.
Command
Mode
Global configuration mode.
Usage Guide
In addition to the timestamp, it is possible to add sequential numbers to the logs, numbering from 1.
Then, it is clearly known whether the logs are lost or not and their sequence.
Configuration
Examples
The example below adds sequential numbers to the logs.
Ruijie(config)# service sequence-numbers
Related
Commands
Command Description
logging on
Record logs on different devices.
service timestamps Attach the timestamp to the logs