Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 1048 / 1192

CLI Reference GRTD Configuration Commands
show diagnostic content
Use this command to display diagnostic test information of a particular module in privileged
EXEC mode, including all test items, attributes of test items, and configuration of test items of
the management board or slot.
show diagnostic content [ slot slot_id [ sub_sysytem subsys_id ]]
Parameter
description
Parameter Description
sub_system
subsys_id
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
slot slot_id
Slot ID
Default This command has no default setting.
Command
mode
Privileged EXEC mode
Usage
guidelines
Note
You can use the show module
command to display module
information.
Examples
Example 1: The following example displays diagnostic information
of module 1:
Ruijie# show diagnostic content slot 1/0
**************************************************************
*****
*Diagnostic test suite attributes:
M/C*/-Minimal bootup level test / Complete bootup level test / NA
P/V*/-Per port test / Per device test / NA
D/N*/-Disruptive test / Non-disruptive test / NA
X*/-Not a health monitoring test / NA
F*/-Fixed monitoring interval test / NA
E*/-Always enabled monitoring test / NA
A/I*/-Monitoring in active / Monitoring in inactive / NA
Y/O*/-Key test / Non-key test / NA
B*/-Basic ondemand test / NA
R*/-Power-down line cards and need reload mainbord / NA
K*/-Require resetting the line card after the test completed /