Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 100 / 1192

CLI Reference Guide Syslog Configuration Commands
Configuration
Examples
The following example enables log redirection on the device:
Ruijie(config)#logging rd on
Related
Commands
Command Description
show logging count View log information about modules of the system.
show logging
View basic configuration of the log module and log
information in the log buffer.
Platform
Description
-
logging rd rate-limit
Configure the command on the host in global configuration mode to enable the rate limit on log
redirection function in VSU environment and limit log information allowed to be redirected from the
slave or backup device to the host per second. Use the no form of this command to disable the log
redirection rate restricting function.
logging rd rate-limit number [ except [ severity ] ]
no logging rd rate-limit
Parameter
Description
Parameter Description
number
Log information allowed to be redirected per second, which ranges
from 1 to 10000.
Except
No rate limit is imposed on log information on and below this error
level. The default error level is error (3), no rate limit is imposed on
log information on and below the error level.
severity
The error level ranges from 0 to 7. The lower the level is, the higher
the severity is.
Defaults By default, 200 logs can be redirected each second at most.
Command
Mode
Global configuration mode
Usage Guide
This command is used to control output of redirected log information. Use this command to prevent
massive log information from being redirected from the slave or backup device to the host.
Configuration
Examples
The following example sets the number of logs, including debug, allowed to be redirected from the
slave device to the host per second to 10. The limit is not imposed on logs on the warning or higher
error level:
Ruijie(config)#logging rd rate-limit 10 except warnings
Related Command Description