Ruijie RG-ES100 Series Switches Hardware Installation and Reference Guide
Product Overview
The RG-ES126G-LP-L adopts turbine fans for heat dissipation, thereby ensuring normal function of the device in the
specified environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to allow
air circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.
PoE Power Supply
The RG-ES126G-LP-L supports IEEE802.3af and IEEE802.3at PoE. It adopts the Alternative A mode for transmitting
power over Ethernet cabling, that is, power is transmitted through cable pairs 1&2 and 3&6.
LEDs
LED
Panel Identification
State
Meaning
Power status LED
PWR
Off
The switch is not receiving power.
Solid on
The switch is powered on.
Ethernet port status
LED
1-24
Off
The port is not connected.
Solid orange
The port is connected at 10/100 Mbps.
Blinking orange
The port is receiving or transmitting traffic at
10/100 Mbps.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting traffic at 1000
Mbps.
SFP port status LED
SFP1, SFP2
Off
The port is not connected.
Solid orange
The port is connected at 100 Mbps.
Blinking orange
The port is receiving or transmitting traffic at 100
Mbps.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting traffic at 1000
Mbps.
Port PoE status LED
1-24
Off
PoE is not enabled.
Solid on
PoE is enabled. The port is operational.
