Hardware Installation and Reference Guide
Installing the Switch
63
3.6
Adding Unmanaged Device in Topology
Premise: There must be devices that can be managed in the network, including Reyee EG or ES2/NBS Switch
Adding scenarios:
⚫
Select up link device, scan the QR code or manually add the unmanaged device into the topology.
⚫
There is a virtual device in topology. Select the virtual device and scan the QR code or manually add
unmanaged device information into the topology.
3.6.1
Scan QR Code of Unmanaged Device
(1)
Click ‘Topology’ into the topology page.
(2)
Click ‘Topology’ bottom to edit and click on saved devices. To add an unmanaged downlink switch, select
‘Scan to Add’ by scanning the QR code.
