RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
64
SHENZHEN RUIDA TECHNOLOGY CO., LTD
positioning point" option is selected, each starting work will use different
positioning points, and the positioning point rotation order is
1->2->3->4->1->2...... . If the PC starts working with direct output and selects
[Use current point as positioning point], the system always uses the current
point as the positioning point.
3.7.7 Parameter Backup
In the menu interface, users can select the [Backup Factory Parameters] option, and press
the [Enter] key to pop up the password input interface. If the input password is correct, all current
factory parameters and user parameters are backed up to factory parameters and the interface
showing [Set parameters successfully].
Important:
When the machine set out from the factory, use the function of [Backup
Factory Parameter] to back up all the debugged factory parameters and
user parameters. Then, at any time, you can use the [Restore Factory
Parameters] to restore all the parameters of all manufacturers and users.
3.7.8 Parameter Recovery
In the menu interface, select the [Backup Factory Parameters] option, and press the [Enter]
to pop up the password input interface. If the input password is correct, all current user
parameters and manufacturer parameters will be restored to the factory parameters and the
interface showing [Resume parameters successfully].
3.7.9 Permission Settings
In the menu interface, select [Permission Settings] option, press [Enter], it will show the
following interface:
