Tumbler MPR 300
6
!!! The supervisor must arrange for the repair of the non-functional
safety device by a Rühle service engineer. Until the corresponding
parts have been repaired, the supervisor must ensure that the ma-
chine or parts of the machine are not put into operation under any cir-
cumstances!
!!! The cleaning personnel must observe the work procedures from the
"Cleaning" work instructions prepared by the supervisor.
!!! The maintenance personnel may only carry out work specified as
"Regular maintenance" unless any other authorisation has been is-
sued in writing by the manufacturer of the machine. The maintenance
personnel must observe the work procedures from the "Maintenance"
work instructions prepared by the supervisor.
Disconnect the power plug for maintenance work!
!!! Do not modify the machine.
!!! Only use Rühle spare parts and accessories.
!!! The operating instructions as well as all other technical documents
included must be supplied completely when reselling the machine.
1.2
Remaining risk of accidents
!!! All life cycles phases
Error messages of the operating system must be heeded!
Non-compliance is strictly prohibited!
No person or object may be present or located in the
working area of the machine while the program is run-
ning!
!!! All life cycles phases
Work on the cooling unit and cooling system may only be
carried out by a refrigeration installer!
