Tumbler MPR 300
16
5
Service: care, maintenance, repair
Any work related to any kind of service may be carried out only by
Rühle service technicians and by persons authorised by Rühle in writ-
ing. In this regard, a distinction is made between regular care, mainte-
nance and repair. The respective qualification certificate must be is-
sued explicitly for the corresponding task.
Also observe Chapter 1 Safety instructions!
Only qualified technicians may carry out repairs on the cool-
ing system of the machine!
Notify and obtain permission from Rühle customer service if
welding or cutting work is required on the machine!
Reaching into the inside of the machine by opening the side
covers is strictly prohibited when performing "Regular care"
activities!
When working on the electrical equipment of the machine,
ensure that
•
this is only done by qualified personnel!
•
the machine is always disconnected from the power
supply!
a waiting time of at least 10 minutes is observed after
switching off the machine to allow the capacitors of the fre-
quency converters to discharge to a harmless voltage level!
Use of lubricants
–
hygiene area
•
Multi-purpose grease OKS 476 white, for food technology
NSF H1
Reg. No. 137619
➢
Replacing seal rings
Use of lubricants
–
others
•
AUTOL TOP 2000, high pressure grease with synthetic base oil (soap
basis)
