Miknetum MGR 400
9
In such a case, an electrician must change the
direction of rotation inside the mains plug.
The power supply to the machine must be fuse-
protected with 32 A secured with an AC/DC sensitive
ground-fault circuit interrupter (type B).
3
Operating instructions
Please refer to the short instructions supplied with your machine for
the operation of your Miknetum.
Follow also the safety instructions in Chapter 1.1!
Depending on the user programs, the lid and drum are
moved automatically. While the program is running, no
person may stand within the working range of the
machine (front distance at least 1.2 m over the entire
machine width).
When the drum moves automatically a 5 second starting
alert (horn) sounds.
If the power fails when a user program is being executed
the machine will react as follows when the power supply
is reinstated: it will start up again automatically and the
program will continue from that point at which it was
interrupted by the power failure.
In its respective life cycle phases (transport,
commissioning, setup, operation, cleaning,
decommissioning, care / maintenance, dismantling /
disposal) this machine is designed for 1-person operation!
When using this machine, no other person may be present
near the machine. The exception (2-man operation):
Installation and removal of drum lid
Installation and removal of drum lid arms
Installation and removal of tumbling stripper arm
Installation and removal of mixing arm
Installation and removal of standard trolley support