RuggedCom RuggedSwitch RSG2300, Руководство по установке

Страница: 33 / 52

RUGGEDCOM RSG2300
Installation Guide
Chapter 4
Communication Ports
Fiber Optic Ethernet Ports 23
Name
Pin
10/100Base-TX 1000Base-TX
Description
3 TX+ BI_DB+ Transmit Data+
or Bi-Directional
Pair B+
4 Reserved (Do
Not Connect)
BI_DC+ Transmit Data+
or Bi-Directional
Pair C+
5 Reserved (Do
Not Connect)
BI_DC- Receive
Data- or Bi-
Directional Pair C-
6 TX- BI_DB- Transmit
Data- or Bi-
Directional Pair B-
7 Reserved (Do
Not Connect)
BI_DD+ Receive Data-
or Bi-Directional
Pair D+
8 Reserved (Do
Not Connect)
BI_DD- Receive
Data- or Bi-
Directional Pair D-
Specifications
For specifications on the available copper Ethernet ports, refer to Section 5.4, “Copper Ethernet Port
Specifications” .
Section 4.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent
Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.
2 1
Figure 17: MTRJ Port
1. Tx Connector 2. Rx Connector
2 1
Figure 18: LC Port
1. Tx Connector 2. Rx Connector