RDH-16 Digital Radio
USER GUIDE
**NOTE: Your radio was pre-programmed and fully optimized before
shipping to you. You’re not required to use the guide. Go out & play!
Changing Channels:
Press the
[M]
button located on the left side of your
radio to temporarily disable/enable the preset squelch
function of the device and monitor for weak signals on
the selected channel.
Monitor a Channel
(Analog Only)
To power on the radio, twist the power knob clockwise. A short tone
followed by your current channel will confirm radio power is on.
Twist the channel knob clockwise to change channel up.
Twist the channel knob counterclockwise to change channel down.
Press and hold the
[PTT]
button on the left side of your device.
Release
[PTT]
button when finished transmitting.
Rugged Radios | www.ruggedradios.com | 888-541-7223
Transmitting (TX):
Press and hold the blue
Battery Indicator
button.
3 Beeps
indicates a Full Battery
2 Beeps
indicates a Half Charged Battery
1 Beep
indicates a Low Battery
Battery Indicator
P.N.
RDH-16V or RDH-16U
(PTT)
Battery
Indicator
(M)
Push-to-Talk
Monitor
Channel Knob
Power/Volume Knob
Antenna
LED Indicator Light
The indicator light
turns red during
transmit & turns
green when
receiving.
RDH-16V
