SERVICE/MAINTENANCE
WARNING!
Never attempt to clean a suppressor while it’s attached to a host weapon, as this could lead to personal injury
or death.
WARNING!
Always wear proper protective equipment while performing service/maintenance. Failure to do so could result
in personal injury or death.
WARNING!
Before performing service/maintenance on the muzzle device, remove the magazine and check the chamber of
in serious personal injury or death.
Due to the construction and use of exotic materials, the Alaskan360
™
requires limited
service/maintenance. It is important to keep all the mounting threads clean and free
from debris.
1. This can be accomplished with a small amount of gun cleaning solvent and a brush.
2. All solvent should be fully removed from the suppressor prior to use. This can be
accomplished with hot soapy water taking care to let the suppressor fully drain before
use. The use of compressed air is highly recommended.
WARNING!
obstructions. This should be performed before any use and after all maintenance cycles. Failure to do so could
result in serious personal injury or death.
CONCENTRICITY
It is imperative that the host weapon’s threads are concentric to the bore. This ensures
there is no misalignment between the bore and the suppressor. If you are unsure about
AMMUNITION
Rugged Suppressors recommends that only quality factory loaded ammunition of the
correct grain weight be used. It is up to the operator to determine the correct projectile/
barrel twist to ensure proper stabilization in the host weapon.
WARNING!
in exposure to lead, a substance known to cause birth defects, reproductive harm, cancer and other serious
physical injury. Always have adequate ventilation at all times and wash your hands thoroughly after exposure.
WARNING!
While suppressors reduce the sound impulse of a gun shot they do not eliminate the impulse all together. It is
still necessary for the shooter and any bystanders to wear OSHA approved hearing protection when exposed to
impulses over 85d
b.
OPERATOR’S MANUAL
** WARNING**
Read the operator’s manual in its entirety before use.
Failure to follow all operating instructions, assembly
and disassembly, installation, cleaning and maintenance
instructions before using the suppressor could result in
serious injury or death. If you are at all unsure about any
of the operations or instructions outlined in the operator’s
manual, STOP and CONTACT US
VISIT US AT RUGGEDSUPPRESSORS.COM
864-810-0513 | [email protected]
MADE IN USA
IF FOR ANY REASON YOU HAVE AN ISSUE WITH
A RUGGED SUPPRESSORS PRODUCT, WE WILL
REPAIR OR REPLACE IT FREE OF CHARGE.
LOOSEN
LOOSEN
LOOSEN
