Ruckus Wireless ZoneSwitch 4124, Руководство пользователя

Страница: 332 / 410

318
Command Line Interface
RADIUS Commands
RADIUS Commands
Remote Authentication Dial In User Service (RADIUS) Commands configure a networking
protocol that provides centralized Authentication, Authorization, and Accounting (AAA)
management for computers to connect and use the switch. The system supports RADIUS
authentication for IEEE802.1x, timeout and retry-count changes, re-authentication timer,
and RADIUS accounting for 802.1x. Also supports up to 5 Multi-RADIUS servers when
enabled.
RADIUS-server host
Specifies a RADIUS server host.
Command Mode: Global Configuration
Syntax
RADIUS-server host <IP> key <string> [timeout <sec(s)>] [retransmit
<retries>] [priority <index>]
Description
■
<IP>
- Sets the IP address or hostname of the RADIUS server host.
■
key <string>
- Specifies the authentication and encryption key used between the
NAS and RADIUS server.
■
[timeout <sec(s)>]
- Sets the time interval in seconds that the router waits for the
RADIUS server to reply before retransmitting. The range is 1 to 120.
■
[retransmit <retries>]
- Sets the number of times a RADIUS request is re-sent
to a server. The range is 1 to 254.
■
[priority <index>]
- Sets the priority of the server. The range is 1 to 128.
Example
Switch(config)# RADIUS-server host 192.168.10.2 key karl_radius
timeout 5 retransmit 4 priority 10
Switch(config)#