ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
6
About This Guide
This guide describes how to install, configure, and manage the Ruckus Wireless
TM
ZoneFlex
TM
P300 802.11ac, 5GHz, point-to-point and point-to-point, outdoor Wire-
less Bridge. This guide is written for those responsible for installing and managing
network equipment. Consequently, it assumes that the reader has basic working
knowledge of local area networking, wireless networking, and wireless devices. The
ZoneFlex P300 802.11ac Wireless Bridge is referred to in the rest of this document
as the
ZoneFlex P300
,
bridge
,
root bridge
, or
non-root bridge
.
NOTE
This guide assumes that the ZoneFlex P300 has already been configured
and installed as described in the
ZoneFlex P300 Getting Started Guide
and
ZoneFlex
P300 Wireless Bridge Mounting Guide
.
NOTE
If the information in the release notes differs from the information in this
guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader Portable
Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at
https://support.ruckuswireless.com/documents
Terms Used in This Guide
Ruckus Wireless recommends that you become familiar with the following terms:
•
bridge:
ZoneFlex P300 wireless bridge.
•
Wireless bridge:
the wireless link between a root bridge and a non-root bridge.
•
Manager:
Ruckus Wireless FlexMaster AP and bridge manager.
•
Non-root bridge:
the ZoneFlex P300 connected to an associated root bridge
over the wireless link.
•
Root bridge:
the ZoneFlex P300 connected to the wired Ethernet backhaul.
