Copyright © 2013 Ruckus Wireless, Inc.
Page 3 of 4
Published March 2013, Part Number 800-70494-001
Figure 3.
2
Insert the Torx-head security screw into the hole near the
latch to lock in place.
3
To remove the unit, first remove the security screw, then
depress the latch while rotating the AP so that the T-bar clips
disengage the T-bar.
F
OR
M
ORE
I
NFORMATION
You can now use the wireless network to log into the AP’s Web
interface. Use the Web interface to review and fine-tune a wide
range of AP settings. For information on how to configure the AP
from the Web interface, refer to the
Ruckus Wireless ZoneFlex
Indoor Access Point User Guide
or the Online Help, available
from within the Web interface.
Security screw
hole
