Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 255 / 430

Managing Access Points Individually
Using Limited ZD Discovery for N+1 Redundancy
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
255
10 Call Admission Control : (Disabled by default). Enable Wi-Fi Multimedia
Admission Control (WMM-AC) to support Polycom/Spectralink VIEW
certification. See
Advanced Options under Creating a WLAN for more
information.
11
Spectralink Compatibility
: (Disabled by default). Enable this option if this AP
radio will be used as a voice WLAN for Polycom/Spectralink phones. This option
changes several AP radio settings such as DTIM, BSS minrate and RTS-CTS to
improve voice quality with Spectralink phones.
NOTE: For optimal VoWLAN voice quality, also disable Self-Healing and
Background Scanning from the Configure > Services page).
12 WLAN Service : Uncheck this check box to disable WLAN service entirely for
this radio. (This option can be useful if you want dual-band 802.11n APs to
provide service only on the 5 GHz radio, in order to reduce interference on the
2.4 GHz band, for example.) You can also disable service for a particular WLAN
at specific times of day or days of the week, by setting the Service Schedule.
For more information, see
“Advanced Options” for creating a WLAN.
13
External Antenna
: External antenna configuration is available for the 5 GHz
radio on the ZoneFlex 7762, and for the 2.4 and 5 GHz radios in the 7782-E
APs. Once enabled, enter a gain value in the range of 0 to 90dBi.
14
Radio Band
: (ZoneFlex 7321 only) Select 2.4 GHz or 5 GHz radio band for the
7321 APs.
15 The Network Setting options allow you to configure the IP address settings of
the AP.
•
IP Mode
: Select IPv4 only, IPv6 only or dual IPv4/IPv6 addressing mode.
• If you want the AP to keep its current IP address, click
Keep AP's Setting
.
If the AP’s IP address has not been set, it will automatically attempt to obtain
an IP address via DHCP.
• If you want the AP to automatically obtain its IP address settings from a DHCP
server on the network, click the
DHCP option in Management IP . You do
not need to configure the other settings (netmask, gateway, and DNS
servers).
• If you want to assign a static IP address to the AP, click the Manual option
next to Device IP Settings, and then set the values for the following options:
- IP Address