Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 197 / 430

Working with WLAN Groups
Creating a WLAN Group
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
197
1 Create a WLAN service (for example, “Guest Only Service”) that provides guest-
level access only.
2 Create a WLAN group (for example, “Guest Only Group”), and then assign “Guest
Only Service” (WLAN service) to “Guest Only Group” (WLAN group).
3 Assign APs on the 1st Floor (where visitors need wireless access) to your “Guest
Only Group”.
Any wireless client that associates with APs assigned to the “Guest Only Group” will
get the guest-level access privileges defined in your “Guest Only Service.” APs on
the 2nd and 3rd Floors can remain assigned to the Default WLAN Group and provide
normal-level access.
NOTE: Creating WLAN groups is optional. If you do not need to provide different
WLAN services to different areas in your environment, you do not need to create a
WLAN group.
NOTE: A default WLAN group called
Default
exists. The first 27 WLANs that you
create are automatically assigned to this Default WLAN group.
NOTE: A WLAN Group can include a maximum of 27 member WLANs. For dual
radio APs, each radio can be assigned to only one WLAN Group (single radio APs
can be assigned to only one WLAN Group).
The maximum number of WLAN groups that you can create depends on the
ZoneDirector model.
Table 18. Maximum number of WLAN groups by ZoneDirector model
Creating a WLAN Group
1 Go to
Configure
>
WLANs
.
ZoneDirector Model Max WLAN Groups
ZoneDirector 1100 128
ZoneDirector 3000 1024
ZoneDirector 5000 2048