Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 180 / 430

Creating a WLAN
WLAN Usage Types
180
Ruckus Wireless, Inc.
• In general, the WLAN name is the same as the advertised SSID (the name of
the wireless network as displayed in the client’s wireless configuration
program). However, you can also separate the ESSID from the WLAN name
by entering a name for the WLAN in the first field, and a broadcast SSID in
the second field. In this way, you can advertise the same SSID in multiple
locations (controlled by the same ZoneDirector) while still being able to
manage the different WLANs independently. Each WLAN “name” must be
unique within ZoneDirector, while the broadcast SSID can be the same for
multiple WLANs.
• Description : Enter a brief description of the qualifications/purpose for this WLAN,
e.g., “Engineering” or “Voice.”
WLAN Usage Types
Each WLAN must be configured as one of the following five usage types:
•
Standard Usage
: To create a WLAN with specific options, choose “Standard
Usage.”
• Guest Access : Select a default “Guest Access” WLAN with open access and
customizable encryption (see Configuring Guest Access ). Guest WLANs are
subject to guest access policies, such as redirection and subnet access restric-
tions.
CAUTION! When Guest Access or Wireless Client Isolation (below) is enabled, the
SpeedFlex Wireless Performance tool may not function properly. For example,
SpeedFlex may be inaccessible to users at
http://{zonedirector-ip-
address}/perf
or SpeedFlex may prompt you to install the SpeedFlex
application on the target client, even when it is already installed. Before using
SpeedFlex, verify that both Guest Usage and Wireless Client Isolation options are
disabled. For more information on SpeedFlex, refer to
Measuring Wireless Network
Throughput with SpeedFlex .
•
Hotspot Service (WISPr)
: Create a Hotspot WLAN. A Hotspot service must
first have been created (Configure > Hotspot Services) before it will be available
for selection. See
Creating a Hotspot Service .
•
Hotspot 2.0
: Create a Hotspot 2.0 WLAN. A Hotspot 2.0 Operator must first
have been created (Configure > Hotspot 2.0 Services) before it will be available
for selection. See
Creating a Hotspot 2.0 Service .