manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 335

3.

When you import the wildcard certificate into the ZoneDirectors you will be prompted
to enter the host name – make sure you use the same host name as you will advertise
in DNS for that ZoneDirector (the default is the same configured ZoneDirector name).

NOTE

 Currently it is not possible to support this configuration with the Hotspot captive

portal when it is being used for Zero-IT activation through the ZoneDirector because the
FQDN for the “/activate” URL is identical on both ZoneDirectors. To achieve this use the
Onboarding Portal feature for Zero-IT activation.

Upgrading the License

Depending on the number of Ruckus Wireless APs you need to manage with your
ZoneDirector, you may need to upgrade your license as your network expands.

Contact your authorized Ruckus Wireless reseller to purchase an upgrade license. Once
you load the license via the web interface, it takes effect immediately.

Current license information (description, PO number, status, etc.) is displayed on the
web interface.

NOTE

 The system does not reboot or reset after a license is imported.

To import a new license file:

1.

Go to 

Administer

 > 

License

.

2.

Click 

Choose File

.

3.

Once you select your license file and close the 

Browse

 window, ZoneDirector

immediately attempts to validate and install the license.

335

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

Setting Administrator Preferences

Upgrading the License

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды