Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Страница: 171 / 361

NOTE Creating WLAN groups is optional. If you do not need to provide different WLAN
services to different areas in your environment, you do not need to create a WLAN group.
NOTE A default WLAN group called Default exists. The first 27 WLANs that you create
are automatically assigned to this Default WLAN group.
NOTE A WLAN Group can include a maximum of 27 member WLANs. For dual radio
APs, each radio can be assigned to only one WLAN Group (single radio APs can be
assigned to only one WLAN Group).
The maximum number of WLAN groups that you can create depends on the ZoneDirector
model.
Table 23: Maximum number of WLAN groups by ZoneDirector model
Max WLAN Groups ZoneDirector Model
512 ZoneDirector 1200
1024 ZoneDirector 3000
2048 ZoneDirector 5000
Creating a WLAN Group
1. Go to Configure > WLANs .
2. In the WLAN Groups section, click Create New . The Create New form appears.
3. In Name , type a descriptive name that you want to assign to this WLAN group. For
example, if this WLAN will contain WLANs that are designated for guest users, you
can name this as "Guest WLAN Group."
4. In Description (optional), type some notes or comments about this group.
5. Under Group Settings , select the check boxes for the WLANs that you want to be
part of this WLAN group.
6. In the VLAN override settings, choose whether to override the VLAN configured for
each member WLAN. Available options include:
• No Change : Click this option if you want the WLAN to keep the same VLAN tag
(default: 1).
• Tag : Click this option to override the VLAN configured for the WLAN service.
7. Click OK . The Create New form disappears and the WLAN group that you created
appears in the table under WLAN Groups. You may now assign this WLAN group to
an AP.
171 Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Managing a Wireless Local Area Network
Working with WLAN Groups