50
Ruckus ICX 7850 Switch Hardware Installation Guide
Part Number: 53-1005580-01
Monitoring the Device
Ruckus ICX 7850 Port-Side LEDs
FIGURE 34
Ruckus ICX 7850-32Q Front-Panel LEDs
The Ruckus ICX 7850-48F has the following LEDs on the front panel:
•
Two management port status LEDs (green) for speed and link/activity
•
Two power supply unit (PSU) bicolor status LEDs (green and amber) labeled PWR and PWR2
•
One SYS (system) bicolor status LED (green and amber)
•
One DIAG (diagnostic) bicolor status LED (green and amber)
•
One MS (stacking configuration) bicolor status LED (green and amber)
•
One CLD (cloud management) bicolor status LED (green and amber)
•
One UPDATE (software update) bicolor status LED (green and amber)
•
Five status mode LEDs (green) selected by pressing the status mode button:
-
STAT: Port LEDs indicate link and traffic activity.
-
SPD: Port LEDs indicate the link speed.
-
ID: Port LEDs indicate the stack unit ID when the switch is in stacking mode, or the PE ID when in SPX mode.
-
USB: Indicates files are being copied to a USB drive connected to the USB port.
•
48 bicolor (green and amber) status LEDs for SFP28 ports 1-48. The LED indication is dependent on the mode set by the
status mode button.
•
Four bicolor status LEDs (green and amber) for each of the 8 QSFP28 ports that indicate the status of the ports in 100 GbE
mode, 40 GbE mode, 4x25 GbE mode, and 4x10 GbE mode. The LED indication is dependent on the mode set by the status
mode button.
1
Mode status LEDs: STAT, SPD, ID, USB
7
Management port speed LED
2
SYS (system status) and DIAG (diagnostic) status
LEDs
8
QSFP28 port 100/40 GbE or 4x25/10 GbE mode
lane 1 link/activity LED
3
MS (stacking configuration) status and CLD (cloud
management) LEDs
9
QSFP28 port 4x25/10 GbE mode lane 2
link/activity LED
4
UPDATE (software update) and PWR (PSU 1)
status LEDs
10 QSFP28 port 4x25/10 GbE mode lane 3
link/activity LED
5
PWR2 (PSU 2) status LED
11 QSFP28 port 4x25/10 GbE mode lane 4
link/activity LED
6
Management port link/activity LED
