Ruckus Wireless ICX 7650 Скачать руководство пользователя страница 71

Страница: 71 / 100

Ruckus ICX 7650 Switch Hardware Installation Guide

Part Number: 53-1005301-01

Fan Assemblies

Time and items required

DRAFT: BROCADE CONFIDENTIAL

Time and items required

Installing or removing and replacing a fan assembly should require less than five minutes to complete.

The following items are required to replace a fan assembly:

•

New fan assembly (must have the same airflow direction as the fan assembly being replaced)

•

#1 Phillips screwdriver

Replacing a fan assembly

When installing or replacing a fan assembly unit, keep in mind the following:

•

Fan assemblies can be swapped in or out while the device is running. The remaining fan assemblies provide enough airflow for
the device.

•

The airflow direction of the fan assembly must match that of the installed fan assemblies. All must be either exhaust or intake.

Inserting a new fan assembly

Use the following steps to install a fan assembly in the Ruckus ICX 7650 switch.

FIGURE 36

Installing a fan assembly

If replacing a fan assembly:

Using a Phillips screwdriver, unscrew the captive screw on the fan assembly.

Remove the fan assembly from the chassis by pulling the handle on the fan assembly out and away from the chassis.

Ensure that the replacement fan assembly has the same part number and airflow label as the fan assembly being replaced.

CAUTION

Ensure that the airflow direction of the power supply unit matches that of the installed fan assemblies. The power supplies and
fan assemblies are clearly labeled with either a green arrow with an “E”, or an orange arrow with an "I."

Fan assembly slot

Captive screw

Содержание ICX 7650





































































































Результаты поиска

Содержание ICX 7650

Отзывы:

Похожие инструкции для ICX 7650

Бренды по названию

Популярные бренды

Ruckus Wireless ICX 7650, Руководство по установке оборудования

Результаты поиска

Содержание ICX 7650

Отзывы:

Похожие инструкции для ICX 7650

Бренды по названию

Популярные бренды