Ruckus Wireless ICX 7650 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 100

background image

56

Ruckus ICX 7650 Switch Hardware Installation Guide

Part Number: 53-1005301-01

Power Supplies

Inserting a new AC power supply

DRAFT: BROCADE CONFIDENTIAL

Inserting a new AC power supply

Use the following steps to install an AC power supply in the Ruckus ICX 7650 switch.

FIGURE 33

Installing an AC power supply unit

1.

If replacing a power supply, remove the previously installed power supply from the appropriate slot by pressing the release lever
and pulling the power supply handle.

2.

If installing a new power supply into a slot covered with a filler panel:

a.

Press the release lever on the filler panel.

b.

Remove the filler panel.

3.

Before opening the package that contains the power supply, touch the bag to the switch casing to discharge any potential static
electricity. Ruckus recommends using an ESD wrist strap during installation.

4.

Remove the power supply from the anti-static shielded bag.

5.

Holding the power supply level, guide it into the carrier rails on each side and gently push it all the way into the slot, ensuring that
it firmly engages with the connector and the release lever clicks into its locked position.

When the Ruckus ICX 7650 switch is powered on, the LEDs on the power supply rear panel should light up green to confirm that the
power supply is correctly installed and supplying power.

CAUTION

Power supplies are hot-swappable. However, they should be inserted or removed without a power cord being connected to a
power source to avoid damage.

CAUTION

Ensure that the airflow direction of the power supply unit matches that of the installed fan tray. The power supplies and fan
trays are clearly labeled with either a green arrow with an "E", or an orange arrow with an "I."

CAUTION

If you do not install a power supply in a slot, you must keep the slot filler panel in place. If you run the device with an uncovered
slot, the system will overheat.

«
...
64
65
66
67
68
...
»

Содержание ICX 7650





































































































Отзывы:

Нет отзывов

Похожие инструкции для ICX 7650

Бренд: D-Link Страницы: 267

Бренд: Watchguard Страницы: 40

Бренд: Abocom Страницы: 11

Бренд: Abocom Страницы: 19

Бренд: Patton electronics Страницы: 8

Бренд: Klark Teknik Страницы: 50

Sentry Global Security Modem

Бренд: Server Technology Страницы: 22

Бренд: Qixiang Technology Страницы: 16

Бренд: Chase Research Страницы: 114

Бренд: ADTRAN Страницы: 4

OmniStor 4900F Series

Бренд: Rackable Systems Страницы: 196

SecPath F50X0 Series

Бренд: H3C Страницы: 41

PowerTrans PT-7728

Бренд: Moxa Technologies Страницы: 8

Бренд: Adeunis RF Страницы: 68

Бренд: NAVI Страницы: 18

Бренд: Billion Страницы: 147

Бренд: Asus Страницы: 44

90IG02W1-BU9G10

Бренд: Asus Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды