INS EJ1A
REMOVAL OF FAUCET:
Always turn the water supply
off
before removing the existing faucet or
disassembling a valve. Open both faucet handles to relieve water
pressure and to ensure that the water has been successfully turned off.
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean
Rubinet products. The patina of our living finishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil
on occasion will create a softer look, subtle color changes and character.
TWO HANDLE WIDESPREAD LAVATORY SET
MODEL 1ARBEJL
If you need assistance with installation, replacement parts or have any
questions regarding your Rubinet product, please call a Customer
service representative at:
905-851-6781
toll free
1-800-461-5901
or visit
www.rubinet.com
INS EJ1A
LIFT ROD
POP-UP ROD
THUMB SCREW
SPRING CLIP
LOCK NUT
ADJUSTMENT
SCREW
TAIL PIECE
Assemble the Lift Rod as shown,
Nylon Bearing first then the Rod and
finally the Rod Nut.
Insert the Pop-Up Rod in the Spout.
Push the Lift Rod down to the
Open
Drain Position.
Connect the Pop-Up
Rod to the Extension Ladder as
shown using the Spring Clip and
Thumb Screw to secure both pieces
together.
Insert the Drain Plug into the sink.
With the Pop-Up Rod all the way
down the drain should be open. To
close it, lift the Pop-Up Rod. The
Drain Plug works on gravity and has
an adjustment screw. Loosen the
Lock Nut to make any adjustment
required then re-tighten the Lock Nut
to maintain the adjustment.
Hook up the ‘P’ Trap to the Drain Tail
Piece.
Finally, connect the water supply from
the Shut-Off valves (not supplied) to
the bottom of the Sidebodies.
Remove the Aerator from the spout
and flush the system to clear any
debris that might have accumulated
and replace the aerator.
13
14
15
16
17
18
WIDESPREAD LAV SET
POP-UP DRAIN ASSEMBLY
1
4
