Rubicon netgate XG-7100 Скачать руководство пользователя страница 12

Страница: 12 / 57

Security Gateway Manual

XG-7100

Connecting to the Console Port

Connect to the console. Cable is required.

Tip:

To learn more about getting the most out of your pfSense appliance, sign up for a

pfSense Training

course or

browse our extensive

Resource Library

1.4 Input and Output Ports

1.4.1 Ethernet Ports

Interface Name

Port Name

Port Type

Port Speed

WAN

ETH1

RJ-45

1 Gbps

LAN

ETH2-ETH8

RJ-45

1 Gbps

OPT1

IX0

SFP+

10 Gbps

OPT2

IX1

SFP+

10 Gbps

ETH1-8 are

switched ports

sharing 5 Gbps (2x 2.5 Gbps) to the Intel SoC. These ports can be isolated as an indepen-

dent interface with the configuration of VLAN tagging as shown in

Switch Ports Overview

Warning:

LAGG has limited support currently on the ethernet switchports (Load Balance mode only). For more

information, review the

Switch LAGG

section of the XG-7100 Switch Overview page.

SFP+ Ethernet Ports (IX0-IX1)

IX0-IX1 are discrete ports, each with dedicated 10 Gbps back to the Intel SoC.

Below are some general guidelines for compatible SFP/SFP+ modules:

• Intel-branded SFP+ SR/LR Dual Speed (1G/10G) optical modules.

• Intel-branded SFP+ DA twin-ax cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.

Note:

Limited to 10G link speed (no 1G support).

• Third party SFP+ DA twin-ax cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.

Note:

Limited to 10G link speed (no 1G support).

• SFP+ AoCs (Active optical Cables).

Note:

Limited to 10G link speed (no 1G support).

• Third party SFP+ SR/LR dual speed 1G/10G) optical modules

• SFP+ active copper cables

Содержание netgate XG-7100











































Результаты поиска

Содержание netgate XG-7100

Отзывы:

Rubicon netgate XG-7100, Руководство пользователя, Страница: 12 / 57

Результаты поиска

Содержание netgate XG-7100

Отзывы: