Rubicon Expedition Products Hitch Tent, Руководство пользователя

Страница: 5 / 21

REP Hitch Tent™ Manual P a g e |
5
15) Verify the Cross bars have not moved and
that the “Center” Mark is still in the center of
the bracket.
16) Using an alternating pattern lightly
tighten each of the bolts on the top.
Do not to overtighten one side. The top
plate should make even contact to the top of
the cross bar. A GAP BETWEEN THE TOP
PLATE AND ANGLED PARTS BELOW WILL
REMAIN.
--Over tightening can damage the bracket!!--
17) Note the gap approx. .125” (1/8
th
”)
on the tight top plate of the center
bracket. This needs to remain for
proper functionality of the Hitch Tent.
18) After verifying an even gap all the
way around, in an alternating pattern
tighten each of the bolts snugly. (this
should be no more than ½ turn of the
wrench if everything was properly
seated. (Don’t try to break the wrench
tightening them!)
Table of Contents
_____________________________________________________________________________________
Part Three: Install the legs.
1) Flip the Hitch Tent assembly to its back.
This exposes the brackets to receive the
legs.
2) 2) Locate Legs (D and E)