J C
C
STEP 3
STEP 4
STEP 2
A
B
C
D
E
F
G
Description
Qty
Rubbermaid Incorporated,
Huntersville, NC 28078-1801
U.S.A. 1-888-895-2110
Canada 1-866-595-0525
www.rubbermaid.com
2101798
Letter
Decorative Drawer Front (sold separately)
Dovetail Drawer Box
Undermount Glide Set (Left & Right)
Drawer Lock Clip (Right)
Drawer Lock Clip (Left)
Door Bumper Set of 4
Adjusters
Handle with Screws (sold separately)
Screw, #7 x ½” Wood Screw
Screw, 6mm x 10mm Euro Screw
Screw, #8 - 32 x 7/8” Notched Machine Screw
Screw, #6 x 5/8” Wood Screw
Screw, #8 x 1” Wood Screw
Description
Qty
Letter
H
I
J
K
L
M
1
2
6
2
4
2
1
1
1
1
1
1
2
STEP 1
Pound adjusters into back of drawer face panel.
A
G
G
Angle teeth
this direction.
Please check that you have all parts before beginning and follow the instructions carefully.
FRONT
BACK
BACK
FRONT
Attach (1) Drawer Lock Clip Right (D) and Drawer Lock Clip Left (E) to
underside of Dovetail Drawer Box (B) using (4) Screw, #6 x 5/8” Wood
Screws (L).
Note: Attach clips to forward most corners and screw
into front of drawer box using clip’s hole locations. Adjust clips as
needed.
Attach the Drawer Glides (C) to the Vertical Panels with (4) Euro
Screws (J) for the 14” Drawer Kits. For the 19” Drawer Kits attached
with (6) Euro Screws (J). Add (2) additional screws, #7 x ½” Wood
Screw, (I) in glide location shown.
Note: Extending the glides aids in
accessing the hole locations.
Note: Mounting Hole Location for #7 x ½”
Wood Screw (N). This hole is not
pre-drilled in melamine.
Mounting Hole Locations.
Note: 19” Drawer
Kits requires a third mounting location.
Place drawer face
panel flat onto
solid surface.
Drill through
the desired
Pilot Holes.
A
NOTE: Drill bit size recommended is #9 drill bit.
HANDLE
FRONT
KNOB
B
E
D
E
B
L
FRONT
14" & 19" Depth
Dovetail Drawer Kits
Tools Required
OR
