RTX725x GUIDE 1.0
22
|
P a g e
Proprietary and Confidential
APPENDIX
7
DECT cradle registration
The following steps serve as a guideline for the process of registering the RTX725x headsets to the RTX745x base.
Registration mode is enabled by inserting the headset into the base cradle. The headset can be registered as both
primary and secondary. When the headset is locked as secondary on another RTX745x base or on an RTX374x FP
dongle, the user may return the headset to use its primary state by inserting the headset into the cradle of the
primary base.
Step 1
Insert the headset into the base cradle
Step 2
The headset identifies itself to the base
Step 3
The base decides if the headset can register
a.
If the headset is allowed to register it plays back the “Registering” voice prompt once
i.
The headset starts the “Registration, in progress” LED pattern
ii.
The base displays a visible notification that cradle registration is initiated
iii.
The headset plays back the “Registration succeeded” voice prompt once
iv.
The headset displays the “Registration, success” LED pattern
v.
The base displays a visible notification that cradle registration succeeded
b.
If the headset is not allowed to register it plays back the “Registration failed” voice prompt once
i.
The headset displays the “Registration, failure” LED pattern
ii.
The base displays a visible notification that cradle registration failed
