RTscan RT206, Руководство пользователя

Страница: 25 / 153

Enter Setup
15 *
* Exit Setup
RT20
6
User
G
u
ide
Emulate ALT+Keypad
This feature allows any ASCII character (0x00 - 0xFF) to be sent over the numeric keypad no matter
which keyboard type is selected. Since sending a character involves multiple keystroke emulations, this
method appears less efficient.
The following options are available:

Disable:
No ASCII character is sent in the ALT+Keypad way.

Mode 1:
ASCII characters not supported by the selected keyboard type but falling into 0x20~0xFF
are sent in the ALT+Keypad way.

Mode 2:
ASCII characters falling into 0x20~0xFF are sent in the ALT+Keypad way.

Mode 3:
All ASCII characters (0x00~0xFF) are sent in the ALT+Keypad way.
Note:
In the event of a conflict between
Function Key Mapping
and
Mode 3
,
Function Key Mapping
shall govern.
** Disable Mode 1
Mode 2 Mode 3
Example:
Supposing US
keyboard is selected, barcode data ”AÐF” (65/208/70) is sent as below:
(1)
Mode 1
is enabled:
“A”
--
Keystroke “A”
“Д
--
“ALT Make” + “208” + “ALT Break”
“F”
--
Keystroke “
F
”
(2)
Mode 3
is enabled:
“A” – “ALT Make” + “065” + “ALT Break”
“Д
--
“ALT Make” + “208” + “ALT Break”
“F”
--
“ALT Make” + “070” + “ALT Break”