TIF-2000A
Introduction and Description 9
Specifications
Matrix Input/Output:
0dBu to ±20dBu
Telephone Input/Output:
-30dBu to +6dBu
Noise (200 Hz to 3.8 kHz):
-40dBu or less
Harmonic Distortion (300Hz to 3.8kHz):
Intercom Side
: -30dBu or less
Telephone Side
: -25dBu or less
Frequency Response:
300Hz to 3.8kHz +0dB, -6dB
Matrix Connectors:
DE-9S Female
RJ-12 Female
Telephone Line Connector:
RJ11 Female
Telephone Loop-Thru Connector:
RJ11 Female
Power Requirements:
100-240VAC, 50/60Hz, 1A
Environmental:
Operating Temperature -
0°C to 50°C
Storage Temperature -
-20°C to 75°C
Humidity (Operating and Storage) -
0-95%, non-
condensing
Dimensions:
1.72” (44mm) H x 8.19” (208mm) W x 8” (203mm)
D
Finish:
Thermoplastic front panel, aluminum case and rear
panel, light gray finish
Agency Compliance:
Emissions (Class A):
KN 32 NRRA Notice 2017-19 (2017.12.28)
EN 55032: 2012/AC:2013
AS/NZS CISPR 32: 2015
VCCI 32-1
ICES-003: 2016
FCC Part 15 subpart B
CNS 13438: 2006
Immunity:
EN 55024: 2010+A1:2015
EN 55035 2017
KN 35
Safety:
UL 60950-1, 2nd Edition, 2014-10-14
CAN/CSA C22.2 No. 60950-1-07, 2nd
Edition, 2014-10
EN 60950-1:2006/A11:2009/A1:2010/
A12:2011/A2:2013
IEC 60950-1:2005 2nd Ed, Am1:2009/
Am2:2013
UL 62368-1, 2nd Ed,2014-12-01
CAN/CSA C22.2 No. 62368-1-14,2nd Ed
EN 62368-1:2014+A11:2017
IEC 62368-1:2014 2nd Ed.
Telephone Network:
TIA/EIA/IS-968 (2002)
FCC CFR 47, Part 68
TBR-21 (14 April 2009)
Specifications subject to change without notice!