20 Installation and Operation
TIF-2000A
Setting Audio Levels to Telephone Lines
Adjustment may be made via the front panel control (see Figure 1). To adjust the control use a small flat blade screw driver or trim
pot adjustment tool. Initially set the front panel level control for mid-range. Talk at your normal level and adjust the control for the
best audio quality while avoiding going into the red section of the audio meter (to Telephone) located on the front panel.
Configuring for Country’s Telephone System
The TIF2000A should be configured to work with the telephone system to which it is connected. Each country or area of the world
has unique signalling differences that could cause erratic operation of the TIF2000A if it is not properly configured. If the system
you intend to connect is not currently supported, you may request a configuration using the form located in the back of this manual.
To
configure the unit for use with a specific country’s telephone system
, do the following:
NOTE:
AZedit must be configured to allow firmware downloads.
1.
Connect the
TIF-2000A
to the intercom system.
2.
Run
AZedit
and go to the Keypanel Software Versions window (
Status|Software Versions|Keypanels
).
3.
Click the
entry
for the TIF-2000A you wish to configure.
NOTE:
Configurations are in a self-extracting archive on AZedit software cd.
4.
Extract and copy these
files
to a known location on the computer connected to the intercom matrix.
5.
Press
Ctrl+Shift+D
to start the software download process.
A download screen appears
.
6.
Select the
location
you copied the files to in step 4 and select the file corresponding to the country needed.
7.
Click
OK
.
Once the software versions window appears, the process is complete
.
The status reported for the TIF-2000A contains a number corresponding to the country configuration. This is reported as
LOCALE=XX, where XX is a specific number for each country. The possible configurations are:
TABLE 6.
Country Codes
LOCALE #
Country or Countries
0
North America, Korea, Taiwan
1
Belgium
2
France
3
Germany
4
United Kingdom (UK)
5
Italy
6
Japan
7
Netherlands
8
Norway
9
Not Used
10
Singapore
11
Brazil, Sweden
12
Ireland
CUST
Custom Configuration