CHAPTER 2
Installation and Operation
Installation
Rear Panel DIP Switch (S201)
The rear panel DIP switch contains switches to configure the most often change options. These include:
•
auto-answer on/off
•
ring signal on/off
•
password on/off
•
intercom port address
•
full-duplex mode
Auto-Answer
Turning on the auto-answer option sets the unit to answer the phone automatically when it rings. The number of rings required
before it answers is determined by the setting of internal DIP switch S202. If auto-answer is turned off, the line rings until someone
at a keypanel answers the call or until the Select button on the TIF2000A’s front panel is pressed.
To
turn on auto-answer
, do the following:
>
Place
switch 1
in the down position.
To
turn off auto-answer
, do the following:
>
Place
switch 1
in the up position.
Generate Ring Signal
Turning on the generate ring signal option sets the unit so that when the phone line is ringing, keypanels that are configured to
receive ring signals produces an audible ring.
To
turn on the ring signal
, do the following:
>
Place
switch 2
in the down position.
To
turn off the ring signal
, do the following:
>
Place
switch 2
in the up position.