manualshive.com logo in svg

RTS SIP-ISDN, Руководство по аппаратному и программному обеспечению, Страница: 59 / 102

Поделиться
Скачать
RTS SIP-ISDN Скачать руководство пользователя страница 59

59

5.7

Menu Extras

5.7.1

Submenu System Monitor

Via the menu 

System Monitor

 you receive all information about the status of the sys-

tem.

FIG. 45

SYSTEM MONITOR

• Under

 System alarms 

all possible system alarms are displayed. A red LED signals 

a currently existing alarm. It is also displayed how often the alarm occured since the 
unit has been switched on.

The following alarms are signalled:

–

LCA (Logic Cell Array)

: The communication with a programmed component

is faulty.

–

TIME KEEPER

: The communication with the integrated time keeper is faulty.

–

A/D D/A Converter 1

: The communication with the first ADDA Converter is

faulty.

–

A/D D/A Converter 2

: The communication with the second ADDA Converter

is faulty.

–

Temperature Sensor

: The communication with the temperature sensor is

faulty.

–

FLASH EPROM

: The communication with the non-volantile memory is faulty.

Settings cannot be stored or read.

–

MAIN EEPROM

: The communication with the non-volantile memory is faulty.

Settings cannot be stored or read.

NOTE

If an alarm occurs several times or for a longer period of time, please disconnect the
system from electricity. If you switch on the unit and the alarm occurs again, there is
probably a hardware defect.

Alarm counter

Содержание SIP-ISDN







































































































Отзывы:

Нет отзывов