RTS SIP-ISDN, Руководство по аппаратному и программному обеспечению, Страница: 33 / 102

33
5.5.2.1 Configuration
5.5.2.1.1 Operating Modes
FIG. 16 SELECTION OF OPERATING MODE
Connection 1/ Connection 2
Under Operating Modes the operating modes for both channels ( Connection 1 and
Connection 2 ) can be selected. The available options are:
– 1: Telephone to Keypanel
– 2: Keypanel to Matrix
– 3: Matrix to Matrix
– 4: Matrix to Matrix with Trunkmaster
– 5: ELA Mode
• The option Automatic Mode can only be activated for Mode 1: Telephone to
Keypanel or Mode 3: Matrix to Matrix . If the box is checked, the system will de-
tect if Mode 1 or Mode 3 is needed when a connection is established and select the
required operating mode automatically.
• If Mode 1: Telephone to Keypanel or Mode 3: Matrix to Matrix is selected, you
need to select which RS 485 address is to be used.
Data Interface
The settings for the Data Interface (Mode and Baudrate) can be adjusted if Mode 4:
Matrix to Matrix with Trunkmaster is selected. If Mode 1, 2, 3 or 5 is selected, the
settings under Data Interface cannot be changed.