RTS SIP-ISDN, Руководство по аппаратному и программному обеспечению, Страница: 24 / 102

24
4.3.3 Working with Presets
The RTS SIP-ISDN differentiates between
System Settings
and
Operation Set-
tings
.
System Settings are settings that do not change during normal operation like e.g. lan-
guage, date/time etc. These parameters cannot be saved as Preset since a configuration
is usually only required when the system is put into operation.
Operation Settings like e.g. the line interface, Ringing Tone, etc, need to be reconfigured
depending on the application. To easily recall recurring configurations you can store up
to 10 Presets in the system.
You reach the menu for the Presets by pressing the
Menu
softkey once, the cursor
key twice and by pressing the softkey
Select
once as confirmation.
In the input field
Presets
you can search for a certain Preset. As soon as you enter a char-
acter, the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a Preset from the list using the cursor keys and
.
If you now press the
Ok
button, the selected Preset is loaded immediately.
By the softkey
Opt.
(Options) the following functions which you can select via the
softkey
Select
are realised:
–
Load
: The stored Preset is loaded.
–
New
: With the help of this function you can create a new Preset. All current Opera-
tion Settings are stored.
–
Save
: The currently selected Preset is overwritten with the current Operation Set-
tings. For safety reasons a confirmation is required.
–
Delete Preset
: The currently selected Preset is deleted. For safety reasons a confir-
mation is required.
NOTICE
If the configuration has changed, you are asked if you want to
Save settings?
when
you leave the Preset menu. Via the
Yes
softkey the configuration is stored perma-
nently in the system. This Preset is loaded automatically by the system after the unit
is connected to the power supply.