RTS RVON-16, Руководство пользователя

Страница: 19 / 50

RVON-16 Installation 15
Bosch Security Systems, Inc. Technical Manual F.01U.193.291 Rev. 06
15.
Select Enable VAD (Voice Activity Detection), if you want to conserve bandwidth when the audio level is below a
given threshold.
Voice activity detection saves network bandwidth by stopping the flow of audio packets when silence is detected. VAD
is similar to VOX.
NOTE: At this point you may choose another channel to configure or choose another card to configure.
16.
Once you are completely finished, click Apply .
Apply sends all of the changes to all the cards in the intercom, or click Cancel to discard all changes you have made.
RVON Connection Status Screen
The RVON-16 connection status screen displays information pertaining to RVON channel connections. You can only show
statistics for one channel on a card at a time.
NOTE : To view the RVON Connection Status screens, make sure both AZedit and the RVON-16 card are on the same
Ethernet network. The reason this is important is because the statistics are updated once per second. At this rate
of dynamic update, a serial port could not pass the data effectively.
To view the RVON Connection Status screen , do the following:
1.
From the Status menu, select I/O Cards .
The I/O Card Status screen appears showing the types of installed cards .
2.
Right click the card with which you want to work.
A context menu appears .
3.
Select RVON Connection Status .
The RVON Connection Status screen appears. The connection screen contains five (5) pages of information about the
selected channel and are described in detail on the following pages
.