RTS MKP-4, Инструкция пользователя

Страница: 14 / 20

☞
TIF-951 Assignment: To assign the TIF-951 to an
intercom key so that you can answer incoming calls,
use the P-P scroll list. Remember that the TIF-951 2
separate phone lines to 2 separate intercom ports, so
make sure that you select the correct intercom port.
3. When the name you want to assign is displayed in the
call waiting window, release the Scroll button.
4. Press and hold the Copy button, then tap down on an
intercom key to assign talk, or tap up to assign listen.
The talk or listen LED will blink once to confirm the
assignment.
☞
To assign both talk and listen, continue holding the
Copy button while tapping the intercom key both up
and down.
5. Press the Clear button to return to normal operation
after assigning keys. Otherwise, if you do nothing,
the MKP-4 will automatically return to normal
operation after about 30 seconds.
3.2 CLEARING KEY ASSIGNMENTS
1. Make sure that the key or keys that you want to clear
are turned off.
2. Press up and release the call waiting key. This clears
the call waiting display. (Dashes should display.)
3. Press and hold the Copy button, then tap the intercom
key that you want to clear. Tap up to clear the listen
assignment. Tap down to clear the talk assignment.
The talk or listen LED will flash to confirm that the
key assignment is cleared. You can tap several keys
in succession to clear them while continuing to hold
down the Copy button.
3.3 PRINTING DESIGNATION STRIPS
Currently in development.
3.4 CHANGING SETUP PAGES
There are 4 setup pages available. Each setup page can
contain a complete set of key assignments. By changing
the setup page you can therefore quickly change all of the
keys assignments. Change the setup page as follows:
1. Make sure all intercom keys are off.
2. Press and hold the Clear button.
3. While holding the Clear button, press and hold the
Copy button. The currently assigned setup page will
display in the call waiting window. PG 1 means Page
1; PG 2 means Page 2 and so forth.
4. Release both buttons.
5. Tap the Scroll Up or Scroll Down button to select the
desired setup page.
6. Tap the Copy button to assign the selected setup
page. The topmost LED next to the call waiting key
will flash briefly to confirm the assignment.
14 User Instructions MKP-4 Keypanel