display the current level. Further rotation will change the
level.
To display the party line to which a port is assigned, click
either control once. The party line name will display for
about 4 seconds, then the port name will reappear.
6.6.
Saving Configuration Changes
The settings for address, current panel mode and current
setup page are saved in the LCP-102 and will be retained
if the power is turned off.
All display assignments and level settings are uploaded
to the intercom system and become part of the on-line
configuration. This configuration will be retained if there
is a loss of power to the intercom system. However, if
you wish to have a backup copy of your settings, save the
settings to disk using your intercom system configuration
software.
8
User Manual, LCP-102 Level Control Panel