RTS KP-4016, Техническое руководство, Страница: 224 / 306

224 KP-4016/5032 Menu System KP Series
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
To delete a stored auto dial number , do the following:
1.
Starting at the Key Options|Auto Dial menu, select Numbers .
2.
Press the SEL button .
#01:<empty> appears in the panel display.
3.
Using the arrow buttons
,
select the Auto Dial number you want to remove.
4.
Press the SEL button .
#01: with a flashing cursor appears .
NOTE: #01 is used for example purposes only. Depending on the auto dial number you want to delete determines the
number seen here.
5.
Press FWD .
Save Number? appears.
6.
Press the SEL button .
#01: <empty> appears in the panel display. The auto dial number is erased .
To configure a 1-touch auto dial key , do the following:
1.
Starting at the Key Options|Auto Dial menu, select 1-Touch .
2.
Press the SEL button .
Tap Key appears in the panel display.
3.
Tap the key you want to put the TIF 1-Touch assignment.
A scroll list of auto dial phone numbers appear.
4.
Using the arrow buttons, select the phone number you want to assign to the key.
NOTE: To hang up after using the 1-Touch key, you must use the TIF menu or assign Drop to a UPG key. For more
information, see “User Programmable Buttons” on page 73.
Key Options Menu, Chime
Chime indicates a chime tone sounds on incoming call announcements for selected keypanel keys. You can configure the
chime tone to activate for a specified amount of time after a call is received.
The range for this field is one second to five minutes.
NOTE: Keys that have the currently selected Chime and Duration are shown with a red talk bar. Keys with a different
chime or duration are shown with a green talk bar. Keys with no chime do not show a talk bar.
To add a chime tone to keypanel keys , do the following:
1.
Starting at the Key Options, select Chime .
2.
Press the SEL button .
A Chime scroll box and a Duration scroll box appear in the panel display.
3.
Using the arrow buttons, select the system chime (or user chime if Audio package is installed) desired (for example,
System #1through System #12.User 1 through User 4, if Audio package is installed)
4.
Press the SEL button .
The focus moves to the duration scroll box .
5.
Using the up and down arrow buttons, select the duration of the chime .
6.
If using a lever key keypanel, tap down on each keypanel key to which you want to add Chime.
OR
If using a pushbutton keypanel, press each
key to which you want to add Chime.
The selected keys display a red talk bar and a bell icon.
NOTE: Assigning <none> clears the chime from the key. When you change chime types, if Preview is enabled, you hear
the chime play. Also, if you lift the listen key for any key showing it has a chime assigned, you hear the chime
associated with that key. If using pushbutton keypanel, to listen to chime already assigned to a key, press SHIFT
and then the key.