RTS EKP-32 страница 97 Скачать руководство пользователя

Страница: 97 / 120

KP-32 User Manual

Bosch Security Systems, Inc.

User Manual

F.01U.193.253

Rev. 16

16.

Press

PGM



The actual Gateway IP Address appears

17.

Enter the

first number

in the Gateway IP Address.



This activates the first octet of the Gateway IP Address and clears the rest of the address

18.

Press

PGM



This confirms the first octet in the Gateway IP Address and moves you to the second octet

NOTE:

Press

PGM

to skip over any octet that does not need modifications.

19.

Repeat steps

and

until the entire Gateway is entered.

20.

Press

PGM

21.

Press

CLR

to exit the menu.



The changes are now enabled

NOTE:

You can still set the IP Address without being connected to an Ethernet LAN. Once you have entered the IP

information you are prompted to perform a Save Cfg. The address is saved in the keypanel until the



RVON-1 is connected to an Ethernet LAN.

Top Level Menu, RVON Conn.

Select an RVON Connection from the Top Level Menu

The RVON Conn menu contains a list of connection offers from intercoms. This menu allows the keypanel to dynamically
select an intercom and port to which it connects.

select a connection offer

, do the following:

On the KP-32, press

Menu



The top level menu appears in the CWW window

Using the

↓↓

, scroll to

RVON Conn.

Press

PGM



The currently selected intercom port appears in the CWW window. If you have not previously selected a connection,
you see none.

Using the

↓↓

, scroll to the

connection offer

that you want to accept.

Press

PGM



→

<connection offer> appears. The arrow to the left of the offer designates which connection offer was chosen

Press CLR to exit.



The keypanel is now connected to the selected intercom port.

Содержание EKP-32

























































































































Результаты поиска

Содержание EKP-32

Отзывы:

Похожие инструкции для EKP-32

Бренды по названию

Популярные бренды

RTS EKP-32, Инструкция пользователя

Результаты поиска

Содержание EKP-32

Отзывы:

Похожие инструкции для EKP-32

Бренды по названию

Популярные бренды