RTS EKP-32, Инструкция пользователя

Страница: 35 / 120

KP-32 User Manual Telephone Operation 23
Bosch Security Systems, Inc. User Manual F.01U.193.253 Rev. 16
Storing an Autodial Number in the TIF-951
1.
Tap the PHONE key.
2.
Tap the TIF talk key to latch it on.
3.
Dial the phone number you want to store.

The entire phone number sequence can have up to 30 digits .
NOTE: To insert one or more pauses anywhere in the dialing sequence, enter CLR CLR 9 9 for each pause. A pause
may be required, for example, if you need to enter a digit to get an outside line and your phone system
requires a pause before continuing to dial. If you are using credit card dialing, several pauses may also be
required between the phone number and your personal access code.
4.
After dialing the telephone number, click CLR PGM , then enter a two-digit number (01, 02, etc. up to 32) you
want to use as the autodial number.
5.
After storing the autodial number, hang up using the KP9X hang-up sequence.
Storing an Autodial Number in the KP-32
To store an autodial number in the KP-32, do the following:
1.
Press Menu .

Display appears in the call waiting window.
2.
Press

or

to scroll to Key Option.
3.
Press PGM .

Auto Dial appears in the call waiting window .
4.
Press PGM .

Phone#? appears in the call waiting window .
5.
Dial the phone number , including the area code, and any additional dialing procedures.
6.
Press FWD .
7.
Press

or

to scroll to the Auto Dial position to which you want to save the phone number (1 through 10).
8.
Press PGM .

#X saved appears (where X represents the auto dial position)
9.
Run Service, Save Cfg . to save the auto dial number.
Dialing an Autodial Number
1.
Tap the PHONE key to activate dialing mode.
2.
Tap down on the TIF talk key to latch it in the on position.
3.
Tap CLR followed by the autodial number (01, 02, etc.).
4.
When finished dialing, click the PHONE key again to exit dialing mode.
5.
Hang up using the KP9X hang-up sequence.